Xerox N2125A/DT - DocuPrint B/W Laser Printer User Manual page 169

Table C.1 Optional Equipment
Optional Kits
Hard disk drive
550 sheet feeder
Envelope Feeder
Offset Catch Tray
Duplex Module
Ethernet 10Base2 Card
(network-capable printer only)
Token Ring Card
(network-capable printer only)
Serial Card
Face up bin
Downloaded from www.Manualslib.com
To order any of the equipment listed below, see the
separate Supplies/Options Guide or contact your dealer.
Allows for secure job and proof job printing, storage of fonts and
macros, and increases the productivity of multiple-page jobs via
electronic pre-collation (Send Once, RIP Once, and Print Many).
Additional media feeder and paper cassette. Up to two can be
installed.
Powered envelope feeder for high volume envelope/postcard
printing. Can load up to 75 envelopes or 100 postcards.
Enables stacking of up to 500 sheets of paper with the ability to
offset successive jobs (or multiple copies within the same job) from
each other. Supplements the standard output bin.
Allows printing on both sides of the sheet of paper.
Provides 10 MBPS 10Base2 Ethernet network capability for IPX/SPX,
TCP/IP, DLC/LLC, SNMP and EtherTalk protocols.
Provides network capability utilizing IPX/SPX, TCP/IP, DLC/LLC,
SNMP and TokenTalk protocols.
Provides an RS232C interface, using a DB9 connector. The serial
port is bidirectional—i.e., it can receive data from the computer as
well as transmit data from the printer to the computer.
Used as a supplemental bin for output with printed side up.
manuals search engine
Optional Equipment
Use
Table C.1 Page 1 of 2
Appendix C: Printer Options C-3