Table of Contents
Advertisement
Problem
It is too cold inside the
freezer
The appliance does not
work at all.
Replacing the bulb
If it becomes necessary to replace the
lamp:
• break the circuit of the appliance
• remove the lamp cover with a screwdriv-
er as shown in the graphic
• replace the bulb with one of the same
power and specifically designed for
household appliances. (the maximum
power is shown on the light diffuser)
• replace the lamp cover and reconnect
the appliance
TECHNICAL DATA
Volume (gross)
Litre
Volume (net)
Litre
Rated Power
Watt
Voltage
Volts
Further technical information are situated in the rating plate on the external right side of
the appliance.
INSTALLATION
Positioning
Warning! If you are discarding an old
appliance that has a lock or catch on
the lid, you must ensure that it is made
unusable to prevent young children
being trapped inside.
Possible cause
Products to be frozen are
placed too closely to each other
The temperature is not set cor-
rectly
Plug is not connected to the
mains socket properly
Power does not reach the appli-
ance
The appliance is not switched
on
There is no voltage in the mains
socket (try to connect another
appliance into it)
305
Height
mm 876
300
Width
mm 1611
193
Depth
mm 665
230
Weight
Kg
Place the products in a way so
that cold air could circulate
among them
Set a warmer temperature
Connect the mains plug properly
Try connecting another electrical
device to the power outlet
Switch on the appliance
Call an electrician
Warning! Do not operate the freezer if
the lamp cover is damaged or missing.
Rising Time
Energy Consumption
Freezing Capacity
67
Climatic Class
Important! The appliance shall have the
plug accessible after installation.
This appliance can be installed in a dry, well
ventilated indoor (garage or cellar), but for
optimum performance install this appliance
at a location where the ambient tempera-
electrolux 11
Solution
hours
52
kWh/24h
0,871
kg/24h
17
SN-N-
ST-T
Advertisement
Table of Contents
