Table of Contents
Advertisement
26
Technical data
Spinning starts late or the machine does not
spin:
The machine makes an unusual noise:
No water is visible in the drum:
The display shows the alarm code
If you are unable to identify or solve the problem,
contact our service centre. Before telephoning,
make a note of the model, serial number and pur-
chase date of your machine: the Service Centre
will require this information.
Technical data
Dimensions
Electrical connection
Voltage - Overall power - Fuse
Water supply pressure
Problem
Width
Height
Depth
Information on the electrical connection is given on the rating
plate, on the inner edge of the appliance door.
Minimum
Maximum
Possible cause/Solution
The electronic unbalance detection device has
cut in because the laundry is not evenly distrib-
uted in the drum. The laundry is redistributed
by reverse rotation of the drum. This may hap-
pen several times before the unbalance disap-
pears and normal spinning can resume. If, after
some minutes, the laundry is still not evenly
distributed in the drum, the machine will not
spin.
• Redistribute the laundry.
The machine is fitted with a type of motor which
makes an unusual noise compared with other
traditional motors. This new motor ensures a
softer start and more even distribution of the
laundry in the drum when spinning, as well as
increased stability of the machine.
Machines based on modern technology operate
very economically using very little water with-
out affecting performance.
Anti-flooding system has activated.
:
• Disconnect the appliance and contact the
Service Force Centre
60 cm
85 cm
63 cm
0,05 MPa
0,8 MPa
Advertisement
Table of Contents
