The Control Panel And Programme Table - Electrolux ESF 235 Instruction Book

The control panel and programme table

- All figures are nominal and vary for example due to temperature variations on the inlet water.
- The figures apply to washing up 5 settings.
1 Temperature selector
55° - Button in
65° - Button out
2 Selector knob
To start the machine; turn the selector knob clockwise
to the programme start. The ON/OFF switch is built
into the programme selector. To isolate the dishwasher
from the mains completely, unplug it from the wall
socket.
During the water heating process, the timer is
standing still.
3 Cycle sequence lamp
While the programme is in progress, the operating
lamp is lit and it goes out when the programme
is ready.
4 Salt indicator lamp
The operating lamp indicates when the salt needs to be
replenished. The lamp may remain lit for one or more
programmes after replenishment, which is fully normal.
1 4 3
Door lock
Press the handle down and open the door. Avoid opening
the door while the machine is running.
If the door is opened and is put standing ajar after a
completed programme, the dishes will dry faster.
Wash phase
Rinse phases
Rinse with heated water
- 15 -
2