Emerson Research ES20 Owner's Manual page 17

MAIN VOLUME AND VARIABLE BASS VOLUME CONTROLS
Volume Adjustments
Press the MAIN VOLUME + or – buttons on the front panel or the remote control to
increase or decrease the volume. The volume level indicator appears in the main
display. The range is from "00 db" (Minimum) to "80 db" (Maximum). The system
remembers the volume level when the power is switched ' Off' and returns to the
same level when the power is switched ' On' again.
Variable BASS VOLUME Control
Rotate this control on the front panel of the Amplifier/Subwoofer unit to increase or
decrease the amount of bass response from the subwoofer speaker.
NOTES:
1.) We set this control to the Maximum setting at the factory.
2.) The Bass Volume level can only be adjusted manually by rotating the VARIABLE
BASS VOLUME level control on the front panel of the Amplifier/Subwoofer
unit. The Bass level cannot be adjusted by the remote control.
ES20_ib061303.p65
16
16 13/6/2003, 12:13