Table of Contents
Advertisement
Introduction
Simply put, the THOR is the only in-wall subwoofer that
sufficiently provides bass to your home theater system.
The THOR remains stable and maintains next to zero
resonance because the user can bolt the THOR directly to
the studs from the front of the unit. This locks the THOR into
the structure of the home. Earthquake engineers also
added four dog ear fasteners for added sheet rock support.
There are two inches peak-to-peak out of a standard 16"
stud gap.
Arguably, the IW-SUB10's best feature is the SWS
subwoofer. The SWS driver has an amazing 10" diameter
but a mounting depth of only 3 3/4".
impressive excursion is almost the same as the mounting
depth. While other in-wall subs struggle to maintain a good
30Hz, THOR will go all the way down to 19Hz and counting.
By including a passive radiator in the design, Earthquake
Safety Instructions
Safety First
This documentation contains general safety, installation,
and operating instructions for the THOR In-Wall SUB10.
It is important to read this user's manual before
attempting to use this product. Pay particular attention
to the safety instructions.
Symbols Explained:
Appears on the component to indicate
the presence of uninsulated,
dangerous voltage inside the
enclosure – voltage that may be
sufficient to constitute a risk of shock.
Calls attention to a procedure,
practice, condition or the like that, if
not correctly performed or adhered to,
could result in injury or death.
Calls attention to a procedure,
practice, condition or the like that, if
not correctly performed or adhered to,
could result in damage to or
destruction of part or all of the product.
Note:
Calls attention to information that is
essential to highlight.
engineers maximized the small amount of given air space.
This style of enclosure also helps deliver a very clean and
deep impact bass. THOR's back-box is constructed with
extra thick high-temperature PVC and is reinforced from
front to back all the way through the cabinet.
methods of reinforcement designs ensure the THOR's
prolonged strength, durability, and maximum dampening
capability. The first is the front to back bridges that sur-
round the drivers. At these points the cabinet is most
vulnerable to flexing and warping over time. Not the THOR.
THOR's bridges are locked using the mounting screws and
can literally be stood on top of by a 200 pound man. Fiber
In addition, the
fill was also used for added resonance protection. And last
but not least, crisscrossed ribs across the bottom of the
enclosure make this in-wall enclosure the strongest and
most durable. This type of internal bracing and attention to
detail is only used in the IW-SUB10 and only at
Earthquake.
1)
2)
3)
4)
5)
6)
7)
8)
9)
10) Protect the power cord from being walked on or
11) Only use attachments and accessories specified by
Read these instructions in their entirety.
Store this manual and packaging in a safe place.
Heed all warnings.
Follow instructions (do not take shortcuts).
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatuses that produce heat.
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two
blades with one wider than the other. The
grounding-type plug has two blades and a third
grounding prong. The wide blade or the third prong
is provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician
for replacement of the obsolete outlet.
pinched, particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
the manufacturer.
Specifications are subject to change without notice.
Three
3
Advertisement
Table of Contents
