Inquiry Data - Seagate ST32430N - Hawk 2.1 GB Hard Drive Product Manual

Hawk 2lp series
Hide thumbs Also See for ST32430N - Hawk 2.1 GB Hard Drive:
Table of Contents

Advertisement

Product Manual - Hawk 2LP Family SCSI-2 (Volume 1), Rev. A
______________________________________________________________________________________
11.3.1

Inquiry data

11.3.1.1
Standard Inquiry data
Table 11.3.1-1 following lists the Standard Inquiry command data that the drive should return to the initiator
per the format given in the SCSI-2 Interface Product Manual P/N 77738479, section 5.1.1.3.
Bytes
0-15
16-31
32-47
48-63
64-79
80-95
96-111
112-127
128-143
144-148
*Copyright Year - changes with actual year.
Notes.
**
01 means SCSI-1 implemented;
02 means SCSI-2/SCSI-3 implemented. Hawk 2LP Family drives can be changed between these two
configurations. Default is 02.
***
01 means response data is in SCSI-1 format and has compatibility with Common Command Set data.
02 means response data is in SCSI-2/SCSI-3 format (some SCSI-3 features are also supported). The
drive can be changed between these two configurations. Default is 02.
R#
Four ASCII digits representing the last four digits of the product Firmware Release number. This
information is also given in the Vital Product data page C0h, together with servo RAM and ROM release
numbers.
S#
Eight ASCII digits representing the eight digits of the product serial number.
D#
Four ASCII digits representing the firmware distribution diskette serial number.
[ ]
Bytes 18 through 24 will reflect model of drive. Shown here are hex values for Model ST32430N. Values
for ST31230N are 33 31 32 33 30 4E 20.
For model ND byte 24 is 44 (D).
11.3.1.2
Inquiry Vital Product data
Instead of the standard Inquiry data shown in Table 11.3.1-1, the initiator can request several Vital Product Data
pages by setting the Inquiry command EVPD bit to one. The SCSI, Version 2 Interface Product Manual P/N
77738479, section 5.1.1.3.1 lists the Vital Product Data pages supported and describes their formats. A
separate Inquiry command must be sent to the drive for each Vital Product Data page the initiator wants the
drive to send back.
Table 11.3.1-1. Hawk 2LP family drive Standard Inquiry data
Data (HEX)
00 00 ** *** 8F 00 00 12 53 45 41 47 41 54 45 20
53 54 [33][32][34][33][30][4E][20] 20 20 20 20 20 20 20
R# R# R# R# S# S# S# S# S# S# S# S# 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 43 6F 70 79 72 69 67 68 74 20 28 63 29 20 31* *COPYRIGHT
39* 39* 33* 20 53 65 61 67 61 74 65 20 41 6C 6C 20
72 69 67 68 74 73 20 72 65 73 65 72 76 65 64 20
D# D# D# D#
35
VENDOR ID
PRODUCT ID
NOTICE

Advertisement

Table of Contents
loading

Table of Contents