Factory Default Setting; Jumper Configuration; Jumper Setting Of Master Or Slave Device - Fujitsu MPC3096AT - Desktop 9.7 GB Hard Drive Product Manual

3.4.2

Factory default setting

Figure 3.11 shows the default setting position at the factory. (Master device setting)
C04
C01
3.4.3

Jumper configuration

(1) Device type
Master device (device #0) or slave device (device #1) is selected.
(a) Master device
Figure 3.12 Jumper setting of master or slave device
(2) Cable Select (CSEL)
In Cable Select mode, the device can be configured either master device or slave device. For
use of Cable Select function, Unique interface cable is needed.
3 - 10
B02 06
A02
A01
B01 05
Figure 3.11 Factory default setting
B02 06
B01 05
C141-E055-01EN
B02 06
B01 05
(b) Slave device
A40
A39