Picture/ Audio/ Advanced Adjustment; Picture; Audio - Sanyo LCD-42E40W User Manual

PICTURE/ AUDIO/ ADVANCED
ADJUSTMENT

PICTURE

ADJUSTING THE PICTURE LEVELS
PICTURE MODE OPERATION
1
Press the MENU button on the remote control to
display the Main menu.
2
Use the CURSOR
PICTURE. Press the OK button.
3
Use the CURSOR (UP) and
to select the Picture Mode. Press the OK button.
4
Use the CURSOR (UP) and
select the Cinema, Standard, Vivid or User. Press
the OK button to add a red hook in the blank space.
BRIGHTNESS/ CONTRAST/ SATURATION/ HUE/
SHARPNESS OPERATION
1
Press the MENU button on the remote control to
display the Main menu.
2
Use the CURSOR
PICTURE. Press the OK button.
3
Use the CURSOR (UP) and
select the Brightness, Contrast, Saturation, Hue
or Sharpness. Press the OK button.
4
Use the CURSOR
setting.
COLOR TEMPERATURE OPERATION
1
Press the MENU button to display the Main menu.
Press the OK button.
2
Use the CURSOR
PICTURE. Press the OK button.
3
Use the CURSOR (UP) and
highlight Color Temperature. Press the OK button.
4
Use the CURSOR (UP) and
select Warm, Normal or Cool. Press the OK button.
VIDEO3 OPERATION
1
2
3
4
RESET PICTURE OPERATION
Reset Picture- Make the previous adjustment settings
under the PICTURE mode recovered from the factory
default value.
1
2
3
NOTE : Press the MENU button to return to the PICTURE

AUDIO

(Down) buttons
(Down) buttons to
(Down) buttons to
SOUND MODE OPERATION
1
2
3
4
(Down) buttons to
NOTES:
User mode (Sound Equalier) will allow to adjust
(Down) buttons to
frequency response from 100Hz to 10kHz by user.
Use the
select frequency.
Press the MENU button to display the Main menu.
Press the OK button.
Use the CURSOR
PICTURE. Press the OK button.
Use the CURSOR (UP) and
highlight Video2. Press the OK button.
Use the CURSOR (UP) and
select YPbPr or Video. Press the OK button.
Use the CURSOR
PICTURE. Press the OK button.
Use the CURSOR (UP) and
to highlight Reset Picture. Press the OK button.
Use the CURSOR (UP) and
to select Reset or Cancel. Press the OK button.
mode menu.
Press the MENU button on the remote control to
display the Main menu.
Use the CURSOR
AUDIO. Press the OK button.
Use the CURSOR (UP) and
select Sound Mode. Press the OK button.
Use the CURSOR
setting.(Off/Rock/Pop/Jazz/Vocal/User).
CURSOR (UP) and
(Down) buttons to
(Down) buttons to
(Down) buttons
(Down) buttons
(Down) buttons to
(Down)
bottons to
19