Technical Specifications; Labelwriter Printer Specifications - Dymo Version 7.5 User Manual

This section gives the printer specifications for all the printers. You will also find information on
DYMO's Software Development Kit which will allow you to use the LabelWriter printer and
software with your application.

LabelWriter Printer Specifications

Print Method Direct Thermal
Print Resolution 300 dots per inch (11.8 dots per mm)
Print Speed
(labels/min for address
label in text mode)
Maximum Print Width
Maximum Media Width 2.44" (62 mm) in all printers
Maximum Label Length User-definable
USB (USB Spec 1.1 protocol);
Interface
Serial (Bi-directional, RS232) serial
115,200 baud, 8 data bits, no parity,
Serial Printer Settings
hardware handshaking
4 7/8" (12.4 cm) x 5 3/4" (14.6 cm) x 7 1/4" (18.4 cm)
Dimensions (WHD)
Weight 1 1/2 pounds (0.68 kg)
Average Print Head Life 2,000,000 linear inches (over 31 miles) 50800 linear meters
100-240 V
~ 850 mA
Printer Power
Requirements
47-63 Hz,
Class II
1000 labels
Rated Duty Cycle
(labels per hour)
Regulatory Approvals CE, FCC, cTUVus, GS and C-Tick
Warranty Two Year Limited
a. Label printer specifications
b. The LabelWriter printer's internal power supply allows you to use it Worldwide with an appropriate adapter.

Technical Specifications

330
300 330
Turbo
16 16
1.57" 2.25" 2.25"
40 mm 56 mm 56 mm
24 VDC 1.0 A
b
310 320
32 8 16
1.57" 2.25"
40 mm 56 mm
USB (USB Spec
1.1 protocol)
N/A N/A
Appendix A
Twin
400 400 Turbo
Turbo
40 55
2.25" 2.25" 2.25"
56 mm 56 mm 56 mm
USB 2.0 Full Speed Printer Class Device
N/A N/A N/A
24 VDC 1.75 A
1000 labels
per side
a
Duo
55 55
2.25"
56 mm
N/A
(183 mm) x
(140 mm)
(1.35 kg)
1000 labels
45