Dimplex CDS8515 Owner's Manual page 8

B. Manual Selection Switch
To choose between flame effect setting, flame effect with Purifire™
setting, and flame effect with Purifire™ and heat setting.
Pressing the switch up (" I " position) has the same effect as the ON
button on the remote control and pressing the switch down (" II "
position) has the same effect as the OFF button of the remote control.
Pressing the switch up once activates Level 1, twice activates Level
2, three times activates Level 3. Pressing the switch down turns the
electric stove OFF.
Level 1: The flame effect is turned on and the first red indicator is
activated.
Level 2: The flame effect remains on, the Purifire™ is activated, and
the first and second red indicator lights are activated.
Level 3: The flame effect and Purifire™ remain on, the heater is
activated, and all three red indicator lights are activated.
C. Interior Light ON/OFF Switch
The Interior Light On/Off Switch supplies power to the interior light.
D. Heater Thermostat Control
To adjust the temperature to your individual requirements, turn the
thermostat control clockwise all the way to turn on the heater. When
the room reached the desired temperature, turn the thermostat knob
counter clockwise until you hear a click. Leave in this position to
maintain the room temperature at this setting. For additional heat, turn
clockwise until you hear the click again and the heater will turn on.
E. LED Indicators
Indicates the current
function of the stove
(Figure 3).
!
NOTE: The heater
may emit a slight,
harmless odor when
first used. This odor is a normal condition caused by initial heating
Figure 3
8
Level 1 Indicator
Level 2 Indicator
Level 3 Indicator