System Backup; System Recovery; Create Recovery Disc - Lenovo C100 - IdeaCentre - Desktop PC User Manual

2. If you select "LAN connection," configure the IP address and proxy server of the
LAN.
2.3.3 Password Management
Password Management allows you to set the password for Lenovo Rescue
System and manage it.
The default password is blank.
Set a password when you access the Password Management for the first time.
If you don't want to set a password, access the system directly and operate
accordingly.

2.4 System Backup

Back up your system partition to an image file. In case of a system failure, you can
restore your system from this image file.
In the Windows system, click Start → All Programs → Lenovo → Lenovo
Rescue System.
After starting the procedure, click System Backup to back up your system
partition according to the prompts.

2.5 System Recovery

Reboot your computer into the system recovery environment. You can choose to
restore to a system backup point or the initial state.

2.6 Create Recovery Disc

Create a bootable recovery disc from current system. These recovery discs are
used to boot your computer and will guide you through the entire restoration
process.
In the Windows system, click Start → All Programs → Lenovo → Lenovo
Rescue System.
After starting the procedure, click Create Recovery Disc to create a bootable
recovery disc from current system.
Follow the screen prompts to create recovery discs.

User Guide
31039393_3000 C100_UG_EN_V2.0.in14 14 2009.8.21 2:13:30 PM