Changing Channel Settings; Automatically Scanning For Channels - Insignia NS-L22X-10A User Manual

NS-L22X-10A_09-0222_MAN_V1_English.book Page 20 Thursday, April 2, 2009 12:14 PM
2 Press or to select CHANNELS. The Channels
menu opens.
Channels
Auto Channel Search
Add/Skip Channels
Favorites
Channel Labels
Channel Strength
Audio Only
OK
MOVE SELECT
ENTER
Adjust channel options
3 Press to highlight Audio Only, then press
OK/ENTER or to open the sub-menu.
4 Press or to select On or Off.
Note
• After the Audio Only be set to On, the picture
disappears within five seconds after the
on-screen menu closes.
• Audio Only works only when the input source is
TV and your TV is receiving a broadcast signal.
• To exit Audio Only mode, press any button.
When you exit Audio Only mode, the Audio
Only option is automatically reset to Off.

Changing channel settings

Note
Unless otherwise noted, all tasks in this section are
based on using the remote control.

Automatically scanning for channels

When you scan for channels, your TV searches for
channels with signals and stores the channel
information in the channel list. When you press
CH or CH , your TV goes to the next or previous
channel in the channel list and skips the channels
that do not have signals.
If the TV signal source changes, for example you
change from an outdoor antenna to cable TV (no
box), you need to scan for channels.
To automatically scan for channels:
1 Press MENU. The on-screen menu opens with
the Picture menu displayed.
Picture
Mode
Brightness
Contrast
Color
Tint
Sharpness
OK
MOVE SELECT
ENTER
Adjust settings to affect picture quality
20
CHANNELS
PICTURE AUDIO SETTINGS
Off
PREVIOUS EXIT
MENU EXIT
PICTURE
AUDIO CHANNELS SETTINGS
Vivid
42
45
54
0
+5
PREVIOUS EXIT
MENU EXIT
www.insigniaproducts.com
2 Press or to select CHANNELS. The Channels
menu opens.
PICTURE AUDIO
Channels
Auto Channel Search
Add/Skip Channels
Favorites
Channel Labels
Channel Strength
Audio Only
OK
MOVE SELECT PREVIOUS
MENU
ENTER
Adjust channel options
3 Press to highlight Auto Channel Search, then
press OK/ENTER or to open the Auto Channel
Search screen.
PICTURE AUDIO
Channels Auto Channel Search
Choose your TV source
Antenna
0 Analog Channels
Cable
0 Digital Channels
Cable/Satellite Box
Scan for channels
OK
MOVE SELECT PREVIOUS
MENU
ENTER
Select Antenna if using an antenna for standard or HD TV
4 Press to highlight Antenna, Cable, or
Cable/Satellite Box, then press OK/ENTER to
start the scan. You can see the search progress
and how many channels are found in the
on-screen menu. After the scan is complete, the
menu closes and your TV tunes to the first
channel in the list.
Note
You can press EXIT to stop the search.
If you select Cable/Satellite Box, your TV will not
scan for channels because the available channels are
provided by the box. Press EXIT to close the menu.
CHANNELS
SETTINGS
Off
EXIT
EXIT
CHANNELS
SETTINGS
EXIT
EXIT