Advertisement
Page 3 of 3
Track Mounting, Power Feed Systems and Mounting Patterns
Power Extension Connector
Replaces Dead End Cover at end of track to
permit power continuity around structural
obstacles to another track section.
Accepts same power feed-in kits as Live End.
6146ALCE Matte Aluminum
6146BKCE Matte Black
6146WHCE Matte White
Over Beam or Through Beam
M20 (3/8" or 1/2")
Connector
Track
Power Extension
Connector
Wall
Through Wall or Column
M20 (3/8" or 1/2")
Connector
Track
Power Extension
Connector
Wall
Lightolier is a Philips group brand
Direct Feed into Connectors
The Live End, "L", "T", "X", In-Line & Variable
Angle Connectors will accept an M20 (3/8" or
1/2") electrical fitting. Does not require a
separate power feed kit.
M20 (3/8" or 1/2")
Connector (by others)
Beam
Cast Plug
Jump
Live End
Track
Power Extension
Connector
1/2" 14 Thread,
Integral with Live End
Jump
(Conduit)
Track
Power Extension
Connector
Neutral
Track (Typ)
Neutral
Fig. 1
Advent Lytespan
1 and 2 Circuit Track
®
Track Unit
Locknut
Live End Cover
Track Unit
Live End
M20 (3/8" or 1/2") Fitting, 3/8" recommended
(by others). Note: Use M20 locknut (not
shown) with M20 Fitting (by others). No
locknut needed with 3/8" or 1/2" fitting.
6151XXCE2
External Left
Neutral
6151XXCE1
Neutral
External Right
6151XXCE4
Internal Left
Neutral
Neutral
6151XXCE3
Internal Right
View from Floor
Job Information
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2009 Philips Group • B0309
61XMCE
"L" Connector
The "L" connector is polarized and pre-wired.
It may be rotated for right angle or left angle
turn. KO permits direct feed with electrical
connector.
6150ALCE Matte Aluminum
6150BKCE Matte Black
6150WHCE Matte White
3-11/32"
"T" Connector
The "T" connector is polarized and pre-wired.
Used to make "T" pattern with track. (See
fig. 1) 12 ga. copper jumper wires supplied to
make all necessary connections. KO permits
direct feed with electrical connector.
6151**CE1 External Right AL
6151**CE2 External Left AL
6151**CE3 Internal Right AL
6151**CE4 Internal Left AL
**Finishes: AL Matte Aluminum
BK Matte Black
WH Matte White
5-1/2"
"X" Connector
The "X" connector is not pre-wired or
polarized. Used to make "X" pattern with
track. 12ga. copper jumper wires supplied to
make all necessary connections. KO permits
direct feed with electrical connector.
6152ALCE Matte Aluminum
6152BKCE Matte Black
6152WHCE Matte White
5-1/2"
Type:
Advertisement
