D-Link DIR-455 User Manual page 29

Section 3 - Configuration
Wireless Channel:
Visibility Status:
Security Mode:
Radius Server IP:
Radius Port:
Radius Shared Key:
D-Link DIR-455 User Manual
Indicates the channel setting for the DIR-
455. By default the channel is set to 11.
This can be changed to fit the channel
setting for an existing wireless network or
to customize your wireless network. Click
Auto Channel Scan to automatically
select the channel that it will operate on.
This option is recommended because
the router will choose the channel with
the least amount of interference.
Select Invisible if you do not want the
SSID of your wireless network to be
broadcasted by DIR-455. The SSID
of your router will not be seen by Site
Survey utilities. Therefore while setting
up your wireless clients, you will have
to manually enter your SSID to connect
to the router.
WIRELESS SECURITY MODE
This device supports three wireless security modes, WEP, WPA-Personal, WPA-Enterprise or None. WEP
is the original wireless encryption standard. WPA provides a higher level of security and WPA-Personal
does not require an authentication server. When WPA enterprise is enabled, the router uses EAP (802.1x) to
authenticate clients via a remote RADIUS server.
IP address of RADIUS server.
The port used for RADIUS server. The default port is 1812.
Key value shared by RADIUS server and this device.
Please refer to Section 4 - Wireless Security for more information on security and encryption.
Click Save Settings to save your changes, or click Don't Save Settings to discard your changes.
25