INDEX Safety notice items....................2-4 Accessories ....................... 4 Product Overview ...................... 4 Control Panel Overview .................... 5 Remote Control Overview..................6-7 Connections between different input signals ............8-9 Menu operations....................10-21 Technical Specifications..................22 Introduction Thank you for choosing this product. This manual will guide you for proper operation. Before operating the TV, please read this manual properly.
1- Safety notice items Preparation For ventilation, leave a space of at least 10cm free all around the set. To prevent any fault and unsafe situations, please do not place any objects on top of the set. Use this apparatus in moderate climates. Please read the following recommended safety precautions carefully for your safety.
Page 4
7. Lightning In case of storm and lightning or when going on holiday, disconnect the power cord from the wall outlet. 8. Replacement Parts When replacement parts are required, be sure the service technician has used replacement parts which are specified by the manufacturer or have the same specifications as the original one.
Note: This device is not suitable for a long-time display of still pictures, including logos, video games, computer games, Teletext and screen non-filling contents. Any persistent images caused by displaying still pictures, logos, video games, computer images, Teletext and screen non-filling contents cannot be erased.
4- Control Panel Overview (1) Control Panel Functions To select the input signal: TV/VIDEO/S-VIDEO/YPbPr/PC/HDMI INPUT – MENU – Enter into MENU – TV channel up – TV channel down VOL+ – Volume up / Right orientation VOL- – Volume down / Left orientation POWER –...
Page 8
1- Illustration of the keys on the remote control: Screen Display ON/OFF 1. DISPLAY Favorite channel 2. FAV Select TV / VIDEO / S-VIDEO / YPbPr / PC / HDMI 3. INPUT Display digital program information 4. GUIDE Switch to different display mode 5.
6- Connecting Input Signals to TV A) Connect with TV signal Connection steps: Power your LCD TV off. Connect an antenna cable (CATV) to the corresponding interface connector (75 Ω ANT) on the back of the LCD-TV. Connect the other end of the antenna cable to the antenna connector on the wall or on your digital cable / satellite receiver.
Page 10
D) Connect with HDMI signal Connection steps: Read the user guide supplied with your AV devices and ensure that it has a “HDMI” connector; Power your LCD TV off. Connect a HDMI cable to the corresponding interface connector on the back of the LCD-TV. Turn on the power of the LCD-TV.
7- TV Operation (1) Basic operation Initial Setup Menu NOTE: If this is the first time you turn on the LCD TV, the Initial Setup Menu will display. Menu Language Select the preferred language when viewing on screen menus. Use the ENTER/► to select language. Tuning Band Select Tuning Band mode.
Page 12
Volume Control 1. Press VOL+/-button to adjust the volume 2. Press MUTE button to mute the TV, Press MUTE button again or VOL+/- button to cancel the mute function. The On Screen Display (OSD) may display different screen settings based on the input signal of use.
PICTURE menu options 1. Press MENU button on the side panel or the remote control to display the main menu. 2. Press ▲/▼ button to select the PICTURE menu, then press ► button for the submenu. 3. Press ▲/▼ button to select the item you want to adjust. 4.
Aspect Ratio Press ▼ / ▲ button to select this item, then press ENTER/► button to adjust the aspect the aspect ratio of the picture. (Available aspect ratio: Full Screen, Normal, Zoom, Wide, Cinema, Waterglass, Fullscreen) AUDIO menu options 1. Press MENU button on the side panel or the remote control to display the main menu. 2.
Setup menu options 1. Press MENU button on the side panel or the remote control to display the main menu. 2. Press ▲/▼ button to select the SETUP menu, then press ► button for the submenu. 3. Press ▲/▼ button to select the item you want to adjust. 4.
Page 16
Manual Channel Set 1. Press ENTER button to display a channel list that you can select channel as below: 2. Press ► button to label each channel “Viewable” or “Not Viewable” hannel labels Allows you to name the channel selected. Press ◄/► button to select the position of letter, press ▲/▼...
Feature menu options 1. Press MENU button on the side panel or the remote control to display the main menu. 2. Press ▲/▼ button to select the FEATURE menu, then press ► button for the submenu. 3. Press ▲/▼ button to select the item you want to adjust. 4.
Page 18
Noise Reduction Press ENTER/◄/► button to select the level of noise reduction from Off/Low/Medium/High. Color Temperature Press ENTER/◄/► button to select the color temperature from Cool/Normal/Warm. 3D/YC Press ENTER/◄/► button to set the 3D/YC On or Off. Adaptive Contrast Press ENTER/◄/► button to set the Adaptive Contrast On or Off. Gradient Enable Press ENTER/◄/►...
Page 19
Master Lock Press ENTER/► button to set the Master Lock On/Off. If you set this function on, all the parental control lock will be unavailable and it can play all kinds of programs. Unrated Lock Press ENTER/► button to set the Unrated Lock On/Off. If you set this function on, all the programs will be locked even they are unrated programs.
Page 20
Advanced Rating Press ▼ / ▲ button to select this item, then press ENTER/► button to set advanced rating on/off. Closed Caption Press ▼ / ▲ button to select this item, then press ENTER/► button for Closed Caption Menu. CC Mode Press ENTER/►...
Page 21
Feature menu options in PC Mode Press Input button to select the input source to PC Mode. PC Set Press ▼ / ▲ button to select PC Set, then press ENTER/► button for PC Setting Menu. H-Position Press ENTER/► button to adjust the horizontal position of the picture. V-Position Press ENTER/►...
Page 22
Feature menu options in YPbPr Press INPUT button to select the input source to YPbPr. YPbPr Set Press ▼ / ▲ button to select YPbPr Set, then press ENTER/► button for YPbPr Setting Menu. H-Position Press ENTER/► button to adjust the horizontal position of the picture. V-Position Press ENTER/►...