Related Manuals for iMode iP3019UK
Summary of Contents for iMode iP3019UK
- Page 1 MODEL NO. iP3019UK CD MICRO SYSTEM DOCKING STATION FOR iPod INSTRUCTION MANUAL ROCK SLEEP PLEASE READ BEFORE OPERATING THIS EQUIPMENT...
-
Page 2: Safety Instructions
SAFETY INSTRUCTIONS CAUTION LASER SAFETY: This unit employs a laser. Only qualified RISK OF ELECTRIC SHOCK service personnel should attempt DO NOT OPEN to service this device due to CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOTREMOVE COVER (OR BACK). NO possible eye injury. - Page 3 SAFETY INSTRUCTIONS Before using the unit, be sure to read all operat- on a bed, sofa, rug or other similar surface. This ing instructions carefully. Please note that these product should never be placed near or over a are general precautions and may not pertain to radiator or heat source.
- Page 4 SAFETY INSTRUCTIONS 16. OUTDOOR ANTENNA GROUNDING 21. DAMAGE REQUIRING SERVICE Unplug the product from the wall outlet and refer If an outside antenna is connected to the prod- uct, be sure the antenna system is grounded so servicing to qualified service personnel under the following conditions: as to provide some protection against voltage surges and built-up static charges.
-
Page 5: Preparation For Use
PREPARATION FOR USE Power Sources Power the unit by connecting it to a standard AC outlet (230V ~ 50Hz) via the attached AC adaptor. Changing the Remote Battery WARNING: Danger of explosion if the remote control’s batteries are incorrectly installed. Replace only with the same or equivalent battery. -
Page 6: Location Of Controls
LOCATION OF CONTROLS ROCK SLEEP TIMER OPEN/CLOSE... - Page 7 LOCATION OF CONTROLS FEATURE DEFINED LCD – View the Time, iPod Indicator, and Radio Frequency through this Liquid Crystal Display. Backup Battery Compartment – For Clock Backup (1.5V AAA x 2pcs) CD DOOR – Open using the CD OPEN button. iPOD DOCKING STATION - Connect your iPod, iPod mini, iPod nano.
-
Page 8: Location Of Remote Controls
LOCATION OF REMOTE CONTROLS FEATURE DEFINED R1 MUTE – Use mute the audio sound. R2 STANDBY – Press the standby button to turn the unit off or on. R3 MENU/PROG /MEM/CLK SET – Press the button to program a loaded CD or to move backwards through the menus on a docked iPod. - Page 9 LOCATION OF REMOTE CONTROLS R11 REPEAT/M- BUTTON Press the Repeat button once to repeat an – individual song on a docked iPod or CD single track. Press the Repeat Button twice to repeat an album / play list on a docked iPod or entire CD. In radio mode, press the button cycle through saved radio stations in radio mode.
- Page 10 Included iPod Model Bracket...
-
Page 11: Operation
OPERATION Setting the Clock 1. Press the STANDBY button to turn the unit off, then press and hold the CLK button. 2. Use the FWD/PEV buttons to select 12Hr or 24Hr clock, and press the CLK button to confirm the selection. 3. -
Page 12: Tuning The Am/Fm Radio
OPERATION Playing a CD 1. Press the STANDBY button to turn the unit on. 2. Press the FUNCTION button and switch the unit to CD mode. 3. Press the OPEN/CLOSE button to open the CD door, insert a CD or CD-R/RW disc into the CD Drive and press the OPEN/CLOSE button to close the CD door. -
Page 13: Using The Auxiliary Input
OPERATION Saving and Recall a Radio Station Memory 1. In radio mode, you select the radio station to storage in memory. 2. Press and hold the MEM button to begin saving the current radio station. 3. Press the FWD/PEV buttons to select a memory slot for the current radio station(P01~P10). -
Page 14: Care And Maintenance
Care and Maintenance Caring for Compact Discs a. Treat the disc carefully. Handle the disc only by its edges. Never allow your fingers to come in contact with the shiny, unprinted side of the disc. Do not attach adhesive tape, stickers, etc. to the disc label. -
Page 15: Specifications
Specifications Power Requirement AC ADAPTOR INPUT: 230VAC 50Hz 0.3A OUTPUT: 10VAC 1500mA CLOCK BACK UP BATTERIES: DC 3V (2 x AAA SIZE) Frequency Range Radio Receiving: AM 522 - 1620 KHz FM 87.5 - 108 MHz Power Consumption 20 Watts... - Page 16 UK Customer helpline at: 0 800 032 5264 TERMS OF WARRANTY Curtis International LTD warrants this product to be free from defects in materials and workmanship for 1 year on parts and 90 days on labor. Nothing within this warranty shall imply that Curtis International LTD will be responsible or liable for any damage to any items placed in this product, whether due to any defect of the product, or its use, proper or improper.