Channel Settings; Autoscan - Emerson EWL3706 A Owner's Manual

C
HANNEL SETTINGS

AUTOSCAN

With AUTOSCAN, your TV automatically scans and
memorizes your area's viewable channels. Activate
AUTOSCAN when you turn on your TV for the first
time, change broadcast sources (e.g. from antenna
to CATV), or move your TV to a different broadcast
area.
- 0
SETUP SETUP
BACK
CH RETURN
VOL.
NOTE:
• Make sure the TV is connected to antenna or cable.
1
Display the setup screen.
• Press [SETUP].
The following setup screen appears.
2
Select "CHANNEL" and press [ENTER] to con-
firm.
• Using [ K / L ], select "Autoscan".
Channel Channel
Autoscan
Channel List
Manual Register
Antenna
• Press [ENTER].
STILL
SCREEN
MODE
ENTER ENTER
INFO
CH
MUTE
3
For TV channels, using [ K / L ], select "Air".
For CATV channels, select "Cable".
Autoscan Autoscan
Autoscan will rescan all channels.
This may take a while to complete.
Select the destination of "ANT IN" jack.
Air
Cable Or
ANT IN
• Press [ENTER].
Scanning and memorizing the channels auto-
matically starts.
Now the system is scanning for channels, please wait.
72%
Analog channels
Digital channels
SETUP
Exit
• When the scanning and memorizing are com-
pleted, the lowest memorized channel in the
broadcasting will be displayed.
NOTES:
• If you connect a cable system directly, contact the
CATV installer.
• If you press [POWER] or [SETUP] during Autoscan, this
setting will be canceled.
• If there is no reception connected or a poor signal is detect-
ed, a Hint will appear on screen once scanning stops.
Back
Air
Cable
Cable
1hour
10ch
6ch
13
EN