Prepare; Connect To An Existing Audio System; Connect Power And Switch On - Philips AW1000 User Manual

3 Prepare

Always follow the instructions in this chapter in
sequence.
Connect to an existing audio
system
Connect through the LINE OUT L/Rsockets:
1
Connect a pair of RCA audio cables (red/
white; not supplied) to:
• the LINE OUT L/R sockets on the
back of the unit.
• the audio input sockets on your
existing audio system.
2
Use controls of your existing audio
system to select the audio source that
corresponds to AW1000.
Connect through the OPTICAL
OUTorDIGITAL OUTsocket:
1
Connect an optical or single RCA audio
cable (not supplied) to:
• the OPTICAL OUT or DIGITAL
OUT socket on the back of the unit.
• the corresponding audio output socket
on your existing audio system.
6 EN
2
Connect power and switch
on
AUDIO IN AUDIO IN
•
•
•
•
Use controls of your existing audio
system to select the audio source that
corresponds to AW1000.
Caution
•
Risk of product damage! Make sure that the power
supply voltage matches the voltage printed on the
bottom of the unit.
•
Risk of electric shock! When you unplug the AC cord,
always pull the plug from the socket. Never pull the
cord.
•
Before you connect the AC cord, make sure that you
have completed all the other connections.
Connect the AC power cord to:
• the DC IN socket on the back of the
unit.
• the wall power socket.
» The unit switches on automatically.
» The power indicator blinks amber, and
after a while turns to solid amber.
To switch the unit to normal standby
mode, press .
» The power indicator turns green.
To switch the unit to Eco power standby
mode, press and hold .
To switch the unit on from normal or Eco
power standby mode, press again.