Advertisement
Quick Links
lNSTRIJCTION
SHEET NO,
IS:6088
SLOITED
GRID CEILING CLIPS
0291
FOR USE WITH BASIC OR ADVENT L~ESPAN"
TRACK SYSTEMS ONLY
READ AND UNDERSTAND
THESE INSTRUCTIONS
BEFORE INSTALLING
FIXTURE.
This fixture
is intended
for installation
in accordance
with the National
Electrical
Code and local regulations.
To assure full compliance
with local codes and regulations,
check with your local electrical
inspector
before
installation.
To prevent electrical
shock,
turn off electricity
at fuse box before
proceeding.
Retain these instructions
for reference.
SLOITED
GRID CEILING
SYSTEM
SUCH AS DONN FINELINEP
)
1
AND CHICAGO
METALLIC
ULTRALINE"
3500.
?
"
L<%,..
%8" J
FIG. 1
1.
Use 2 clips for 2' and 4' track units. Use 3 clips for 8' track unit.
2.
Assemble
the clip to the TRACK
MOUNTING
CLIPS (supplied
with the track).
3.
Thread the NUT to the top of the screw. See Fig. 2.
4.
Place one side of the NUT in the SLOTTED
GRID RUNNER
and snap the other side in by pushing
up on
the screw. See Fig. 3.
5.
Tighten
SCREW to the point that the TRACK
MOUNTING
CLIP is tight
against
the runner but can still
be rotated.
S~e Fig. 4.
6.
Secure the TRACK
UNIT by rotating
the TRACK
MOUNTING
CLIP clockwise.
See Fig. 5.
SLOITED GRID
SCREW
&
RUNNER
TRACK MOUNTING CLIP
NUT
TRACK MOUNTING CLIP
FIG. 2
FIG.
3
—
MOUNTING
4
SLOITED GRID
RUNNER
INITIAL
POSITION
TRACK UNIT
ROTATE CLOCKWISE
(looking up from below)
FINAL
SCREW
POSITION
FIG.
4
FIG. 5
1-
I
<5
I"ric> m-l E R":v:::::L,N:
Advertisement
