Connection To An Audio System - Emerson EDVR95E Owner's Manual

• When you change the connections, all devices should be turned off.
• Refer to each owner's manual for further information on other devices.
Method 1
Stereo system
AUDIO
Audio cable
(supplied)
This unit
AUDIO OUT
Connections

Connection to an Audio System

Analog audio
input jacks
DVD/VCR
AUDIO OUT
L
R
or
DVD
AUDIO
OUT
L
R
Method 2
Dolby Digital decoder,
MD deck or DAT deck
Audio Coaxial
Digital cable
(not supplied)
DIGITAL
AUDIO OUT
Note
• If output is Dolby Digital encoded audio, connect
to a Dolby Digital decoder, and set "Dolby Digital"
to "Stream" for the "Digital Out" setting in the
SETUP menu. (Refer to pages 90-91.)
• The audio source on a disc in a Dolby Digital 5.1
channel surround format cannot be recorded as
digital sound by an MD or DAT deck.
• Unless connected to a Dolby Digital decoder, set
"Dolby Digital" to "PCM" for the "Digital Out" set-
ting in the SETUP menu. Playing a DVD using incor-
rect settings may generate noise distortion, and may
also damage the speakers. (Refer to pages 90-91.)
• Set "Dolby Digital" to "PCM" for the "Digital Out"
setting in the SETUP menu for connecting to an
MD deck or DAT deck. (Refer to pages 90-91.)
• By hooking this unit up to a Multi-channel Dolby
Digital decoder, you can enjoy high-quality Dolby
Digital 5.1 channel surround sound as heard in
movie theaters.
Digital audio
COAXIAL
input jack
DVD
DIGITAL
AUDIO OUT
COAXIAL
15