One-Touch Timer Recording - Emerson EWR20V5 Quick Manual

Video VR
DVD-RW DVD-RW DVD-RW DVD-RW
This is a simple way to set the
recording time in blocks of 30
minutes. Check that the disc has
enough recordable space for the
time you set.
After finishing the recording, the
recorder automatically goes into
standby.
First:
DVD
1
Turn on the unit and load a
recordable disc.
Make sure that the TV input is set
on the unit.
This operation may take a
while to be recognized.
2
Using [REC SPEED], select a
recording speed.
Refer to "Recording speed" on
page 25.
3
Make sure that the recording
format is set to the desired
mode.
Refer to "Formatting a disc" on
pages 27-28.
When a DVD-RW disc is
loaded:
You can choose Video mode or
VR mode from the Setting menu.
"Video mode" has been selected
as the default. Refer to page 27
"Choosing the recording format
of a blank disc."
When a DVD-R disc is loaded:
DVD-R discs will always be in
Video mode.
30
Recording

One-touch Timer Recording

DVD-R DVD-R
4
Using [CH K / L] or the
Number buttons, select a
desired channel to record.
5
Hit [REC/OTR] repeatedly to
select a desired recording
time.
Recording time appears on the TV
screen (30 minutes to 8 hours).
Recording will start.
I 0:30
(Normal Recording)
8:00
When the unit reaches the speci-
fied time, it will turn off automati-
cally.
To change the recording time dur-
ing the one-touch Timer
Recording, hit [REC/OTR]
repeatedly until the desired time
appear.
To cancel the one-touch Timer
Recording within the specified
time, hit [STOP C].
This operation may take a
while to be completed.
0:30
1:00
7:30
POWER OPEN/CLOSE
T-SET TIMER PROG.
.@/:
ABC DEF
1 2 3
CH
GHI JKL MNO
4 5 6
PQRS TUV WXYZ VIDEO/TV
7 8 9
DISPLAY SPACE CLEAR
SETUP
0
TOP MENU MENU/LIST RETURN ENTER
REC/OTR DVD REC/OTR
VCR
REC SPEED PLAY
2
REC MONITOR SKIP PAUSE SKIP
SLOW CM SKIP STOP SEARCH
DUBBING ZOOM AUDIO
Note
• The remaining recording time
will appear on the display panel
during an one-touch Timer
Recording. Hit [DISPLAY] to
see it on the TV screen.
• You cannot pause a one-touch
Timer Recording.
• Unlike a Timer Recording, you
can perform the following
operations during a one-touch
Timer Recording.
- Turning off the power.
- Using [REC/OTR] and
[STOP C].
• The unit will be turned off
automatically under the follow-
ing conditions.
1)No space remained on the disc.
2)When a power failure occurs.
• If OTR is finished in DVD dur-
ing playback or REC mode in
VCR, the DVD will be in STOP
mode and the VCR keeps the
current mode.
• When OTR is finished and the
power is turned off, the unit
will switch to the standby
mode automatically if a Timer
Recording has been pro-
grammed. Hit [T-SET] to can-
cel the standby mode for using
the unit continuously.
4
5
5