Connection To An Audio System; Rear Terminals - Emerson EWD70V5SK Owner's Manual

Connection to an Audio System

Method 1
Speaker
(Left)
AUDIO
Back side
FROM
RIGHT SPEAKER
IMPEDANCE 4Ω
This unit
TO SPEAKER
Hint
Hint
• When using the supplied speakers, connect the speakers' AC adapter to the out-
let and turn on the power of the supplied speakers.
• The volume of the supplied speakers can be adjusted. Adjust the volume using
the volume knob of the right side unit.
Method 2
Stereo
system
AUDIO
This unit
(Analog)
AUDIO OUT
Method 3
AUDIO
Dolby Digital decoder,
MD deck or DAT deck
This unit
DIGITAL
AUDIO OUT

Rear Terminals

1
2
3
4
5
Speaker
(Right)
Back side
FROM DVD
IMPEDANCE
4Ω AC INPUT
AC 10V 8VA
TO
LEFT
SPEAKER
1
Connect
2
Connect
L R
Audio cable
(supplied)
COAXIAL
Digital audio
input jack
Audio Coaxial
Digital cable
(commercially
available)
1. DIGITAL AUDIO OUT COAXIAL jack
Connect an optional coaxial digital audio
cable here through the coaxial digital audio in
jack of a decoder or audio receiver.
2. AUDIO OUT jacks
Connect the supplied audio cable
(red/white) here through the audio in jacks
of a TV or other audio equipment.
To
AC outlet
AC adapter
4
(supplied)
Plug in
3
Connect
Analog audio
input jacks
Connection
Connecting to Stereo System.
* To complete these settings, refer to pages 14-15.
Hint
Hint
• Playing a DVD using incorrect settings may generate noise
distortion and may also damage the speakers.
Connection
Connecting to a Dolby Digital decoder
for Dolby Digital audio output.
Connecting to the other equipment (an MD deck or
DAT deck etc.) without Dolby Digital decoder.
* To complete these settings, refer to pages 14-15.
Hint
Hint
• The audio source on a disc in a Dolby Digital 5.1 channel
surround format cannot be recorded as digital sound by an
MD or DAT deck.
• By hooking this unit up to a Multi-channel Dolby Digital
decoder, you can enjoy high-quality Dolby Digital 5.1 chan-
nel surround sound as heard in the movie theaters.
• Playing a DVD using incorrect settings may generate noise
distortion and may also damage the speakers.
3. VIDEO OUT jack
Connect the supplied video cable (yellow)
here through the TV's video in jack.
4. S-VIDEO OUT jack
Connect an optional S-Video cable here
through the S-video in jack of a TV.
5. TO SPEAKER jack
Connect the audio cable of the supplied
speakers here.
– 7 –
Function Overview for Speaker
(Right)
1
2
1. POWER button
To turn the speaker on or off.
2. POWER light
Lights up when power is on.
3. INPUT jack
You can connect to the audio out
jack of other audio equipment or
the headphone jack of a TV.
4. VOLUME knob
To adjust volume.
Hint
Hint
• You can remove the net from front
panel of the speakers.
SETUP > QUICK >
Setting
DOLBY DIGITAL
PCM
SETUP > QUICK >
Setting
DOLBY DIGITAL
BITSTREAM
PCM
3
4
EN