Before First Use; Using The Food Processor - Continental Electric CE22381 Instruction Manual

On: press this button to begin the operation.
Base: the base should never be placed into water for cleaning.

Before first use

Carefully unpack the food processor and remove any package material or label or
stickers. Cleaning all the parts except Base following the instructions in Cleaning and
Maintenance. Handle the blades or disc with extreme care, as they are sharp.

Using the food processor

The food processor can be used for mincing the meat, chopping the nut, shredding or
slicing the vegetables. Using the different attachment to perform different task.
1. Mincing the meat
a) Position the bowl in base (Fig 1) and turn it until locks with the base as
illustrated (Fig 2& Fig
b) Place the blade onto the stem of bowl. Always holding the stem of blade as
blades is extremely sharp. See Fig4.
c) Close the cover. Place the cover in the illustrated direction and turn it until the
tab of cover lock with the Base. This is a safety feature that will enable the
appliance can only operable when the cover is properly in place. Please do not
intend to damage it.
d) Then connect the appliance to power supply.
e) Cut the boneless meat into small pieces and insert it through the feed, use the
Food pusher to press it if necessary. When the On button is depressed the
meat will be minced within seconds. Never overfill the bowl, particularly for beef,
the max weight per time can be processed cannot exceed 300g and the max
running time cannot exceed 30 seconds, and minimum 1 minutes rest time
must be maintained between two consecutive cycles.
3).
Fig.1
Fig.3
3
The bowl handle has been placed as
illustrated direction. Then turn it clockwise
until the bowl has engaged with the base.
Fig.4
Fig.2