Downloading Still Images - Canon VIXIA HF M30 Instruction Manual

Downloading Still Images

Observe the following precautions when the camcorder's access indicator is
flashing. Failure to do so may cause data to become corrupted.
- Do not remove the memory card or detach the USB cable.
- Do not turn off the camcorder or the computer.
- Do not switch between the shooting and playback modes.
The still images you recorded and/or downloaded to the hard disk are
important original data files. Create a copy of the file first before working on it
on your computer.
Do not rotate the image using programs other than ZoomBrowser EX. The
data for the original image will be changed and the image can no longer be
displayed in ZoomBrowser EX or on the camcorder.
If the Server Busy window appears when you connect the camcorder to the
computer, click [Retry].
If the built-in memory or the memory card contains a large number of
images, the correct connection to the computer may not be possible. The
maximum number of images depends on the camcorder used, so please
refer to the relevant chapter in your camcorder's Instruction Manual.
In such case, copy the images from the built-in memory to a memory card
and then use a card reader/writer to transfer the images to the computer. For
instructions on how to connect a card reader/writer, see Using a Card
Reader/Writer ( 33).
The memory capacity that appears in the CameraWindow menu screen will
differ from the capacity that appears on the camcorder's screen.
27
Downloading Still Images