Setting The Alarm Times - Emerson Research CKW2000 Owner's Manual

Setting The Alarm Times

This model has two alarms that can be set and used independently. You may set
both alarms for Radio or Buzzer operation, or set one alarm for Radio and the
other for Buzzer.
Setting The Alarm 1 Wake Up Time
1.) Depress and hold the ALM 1 button for
approximately 1 second.
The "SET ALARM 1" indicator appears and
the Hour digits begin flashing.
2.) Press the or
the display to the correct Alarm 1 wake up
hour.
Example: 6:00 AM
Be sure to observe the AM indicator to confirm
that you have set the hour correctly. If the AM
indicator appears the hour displayed is AM. If
the AM indicator does not appear the hour
displayed is PM.
3.) Press (RIGHT) Navigation button. The
Minute digits begin flashing.
4.) Press the or
the display to the correct wake up minute.
Example: 6:30 AM
5.) When the LCD is showing the correct Alarm 1
Wake-Up Time press the MENU button or the
SELECT button to return to the correct time
and date display.
CKW2000_041207.p65
Navigation buttons to set
Navigation buttons to set
15
15 12/4/2007, 11:56