Display
N
Travel destination is in
the current time zone.
P
Mode dial is not in the
proper position.
u
The flash is lowered.
u
Raise the flash.
u
Unable to create
panorama.
u
Unable to create
panorama. Pan the
camera in one
direction only.
u
Unable to create
panorama. Pan the
camera more slowly.
Lens error
Q
P
Communications error
System error
Q
Problem
Destination in same
time zone as home.
The mode dial is not set
to the correct position.
Flash is lowered in scene
auto selector mode.
Flash is lowered in S
(night portrait) or R
(backlighting) scene
mode.
Could not shoot using
easy panorama.
Lens error.
Error occurred during
communication with
printer.
Error has occurred in
camera's internal
circuitry.
Solution
–
Rotate the mode dial to select
the desired mode.
Slide the K (flash pop-up)
control to make the flash pop
up. To take pictures without
using the flash, take pictures
with the flash lowered.
Slide the K (flash pop-up)
control to make the flash pop
up.
Shooting with easy panorama
may not be possible in the
following situations.
• When shooting does not
end after a certain amount
of time
• When the camera is moved
too fast
• When the camera is not
moved in a straight line in
the panorama direction
Turn camera off and then on
again. If error persists, contact
retailer or Nikon-authorized
service representative.
Turn camera off and
reconnect USB cable.
Turn camera off, remove and
reinsert battery, and turn
camera on. If error persists,
contact retailer or Nikon-
authorized service
representative.
Error Messages
A
170
45
33, 62
33, 65,
66
75
24
162
14, 19
201