Making A Call Using The D Term Cordless Ii; Dedicated Feature Operations - NEC DTH-4R-2 - CORDLESS Lite II BLAC Owner's Manual

Document Revision 3
S 5 M
ECTION
Several advanced features for making calls are available depending on how
the deskset is programmed. Refer to
Operations
1.
2.
3.
S 6 D
ECTION
Calls can be placed on hold, transferred to another extension, or two or more
parties can be conferenced. These operations depend upon how they are set
up in the key system.
4 - 10
C U
AKING A ALL
. This section describes normal call handling.
Remove the handset from the charging unit.
Press the TALK key. The talk icon appears after
the handset and base unit are connected.
-OR-
Press the designated function key (programmed
as a line key). When dial tone is heard, enter the
number to be called.
dialed telephone number.
When the call is finished, place the handset back
in the charging unit. The AutoStandby
automatically hangs up the telephone.
-OR-
If the handset is away from the charging unit, press TALK to hang up the
telephone.
F
EDICATED EATURE
The handset must be within range of the base for the special
operations to function properly.
term
D C
SING THE
Section 6 Dedicated Feature
The display shows the
O
PERATIONS
NEC Unified Solutions, Inc.
II
ORDLESS
term
D Cordless II Handset