Programmed Playback; Random Playback - Emerson PD6810 Owner's Manual

Programmed playback enables tracks on a disc to be played in any desired order. Up to 20
tracks can be programmed.
Note : Programming can only be done when the player is in stop mode.
1. Press the PROGRAM button.
"PRG" indicator and "00"
flashes in the display.
3. Press PROGRAM button
again to memorize the
track.
5. Press the PLAY/PAUSE
button to start playback.
"PRG" indicator is flashing
in the CD display.
7. Press PROGRAM and PLAY/
PAUSE buttons to
resume programmed
playback.
This plays the songs on the disc in random order.
Note : Random playback can only be selected while the player is in the stop mode.
1.
Press the RANDOM button to
play the tracks in random
order. "PLAY" and "RDM"
indicators appear in the
display and play all the tracks
in random order. When all
tracks have been played, the
player stops and the display
shows the total tracks.
PD6810_103106.P65

PROGRAMMED PLAYBACK

2. Press the
button to select the desired
track number.
4. Repeat steps 2 and 3 until all desired tracks
are programmed.
6. Press STOP
stop programmed playback.
The CD playback stops but
the program remains in the
memory.
8. To clear the program memory, open the CD
door, change to Radio function or switch the
power "OFF".

RANDOM PLAYBACK

2
.To cancel Random playback
press "STOP" button, the
display shows total tracks,
indicator of "PLAY" and "RDM"
disappear.
PLAY
RDM
10
10
/
button to
31/10/2006, 10:06