Getting Started; Customer Warranty; Assistance - Cobra 9 BAND ESD 9270 Operating Instructions Manual

Installation
Your Detector
Intro Operation Customer Warranty
Dashboard Mounting

Assistance

1. Place the detector on the dashboard to find a location
where the unit has a clear, level view of the road and is
Secondary Icons
parallel to the road's surface. The angle CANNOT be
adjusted after mounting
2. Remove the paper backing
from one side of the hook-
and-loop fastener.
Notice
3. Attach the pad to the
dashboard at your chosen
location and remove the
other paper backing.
4. Attach the detector to the
hook-and-loop fastener. You
can remove and
reattach the unit as often
as you like.
5. Plug the power cord into the
detector.
6. Plug the cigarette lighter
adapter on the power
cord into your vehicle's
cigarette lighter.
4 English

Getting Started

Your Detector
Getting Started
Intro Operation Customer Warranty
Assistance
Secondary Icons
Notice
Power Indicator Screen
X/K Ka L V/S
To Turn On The Unit And Adjust The Audio Volume
Rotate the On-Off/ Audio
Volume control
Three beeps
clockwise (away
from you).
NOTE
In some vehicles, power is supplied to the cigarette
lighter even while the ignition is Off.
If this is the case with your vehicle, you should turn
Off or unplug your detector when parking
for lengthy periods.
•
Visual Display
The LED in the lower left
corner of the screen will light
to indicate that the power
is On.
Nothing Comes Close to a Cobra 5
®