Emerson EM529 Owner's Manual

WI RELE S S H E ADSE T
Driving while talking on your mobile phone is dangerous, and
illegal in many states.
Check local laws regarding the use of a mobile handset and wireless
headset while driving. If you use the Bluetooth Headset while
driving, ensure your attention and focus remains on your driving.
(Green = ON, Red = OFF)
Noise cancel
microphone 1
Answer/end a call
Owner's Manual
Model: EM529
Noise cancel
microphone 2
In the box In the box In the box In the box In the box
NOTE: Charge the headset for at least 8 hours before using it
for the rst time, even if the RED LED indicator shuts o .
WIR EL ES S H E A DS ET
1. Connect the small end of the USB cable to the charging
2. Connect the other end of the USB cable to either the:
Owner's Manual
Model: EM529
Owner's
3. The RED LED indicator light turns on while the headset is
Manual
4. The RED LED indicator light shuts o when the headset is
Bluetooth
Headset
NOTE: When the battery is running low, the RED LED indicator
S M L
Silicone cushions
USB charging
cable
AC charger
Earhook
Car Charger
Drive Safe Drive Safe
CAUTION: Although this device enables drivers to
conduct handsfree conversations, it is still safer to pull
over before using a mobile phone.
Always keep your full attention on your driving.
Please use your mobile phone, and our
product responsibly while driving!
Location of controls Location of controls
Power Switch
Power ON/OFF
Speaker/
Silicone cushion
Call button
Volume Up
Indicator
light
Volume Down
Charging
socket
Microphone
Charging the headset Charging the headset
socket of the headset.
• AC Charger, and plug into a wall (A/C) outlet
• Computer's USB port
• Car Charger
charging.
fully charged (approximately 2-3 hours).
light starts to ash along with a warning beep.
USB cable
Indicator
light
Charging
Socket
Headset
AC Charger PC Car Charger
About noise cancellation technology About noise cancellation technology
This headset uses a dual microphone design to lter out wind
and unwanted external noise.
Using Noise Cancellation Technology, the headset compares the
sound from the twin built-in microphones, and is able to recognize
the di erence between voice and unwanted background noise.
Noise cancel
microphone 1
Noise cancel
microphone 2
Noise Cancellation Technology
Enables the other end of your
conversation to hear you clearly!
Pairing the headset Pairing the headset
Easy Pairing
(First time pairing only)
Please read through this section before turning the device on.
We recommend reading this manual in it's entirety before
pairing the headset for the rst time.
This Bluetooth headset has an "Easy Pairing" feature which sets
the headset to Pairing Mode the rst time the power switch
is turned on.
1. Make sure the Bluetooth Headset is within 3 feet of our
mobile phone or Bluetooth enabled device.
within 3 feet
Indicator light
Red and Blue ashing
Power Switch
Power ON/OFF
(Green = ON, Red = OFF)
2. Set the [Power] switch to the ON position. The indicator
light should be ashing RED and BLUE alternately, indicating
the headset is in Pairing Mode and ready to connect to your
Bluetooth enabled device.
3. Continue to "Manual Pairing" step 5 shown in the next column.
NOTE: Manual Pairing
If the rst time pairing was unsuccessful or for future pairing,
you will need to manually pair the headset to your Bluetooth
enabled device (see "Manual Pairing" step 1 in the next column ).
Manual Pairing
1. Make sure the Bluetooth Headset is within 3 feet of your
mobile phone or Bluetooth enabled device.
2. Set the [Power] switch to the ON position.
3. Press and HOLD the [Call] button until the indicator light
ashes RED and BLUE alternately.
4. The headset is now in Pairing Mode and is ready to connect
to your mobile phone or Bluetooth enabled device.
Power Switch
Power ON/OFF
(Green = ON, Red = OFF)
within 3 feet
Indicator light
Red and Blue ashing
NOTE: To enter Pairing Mode at any time, you must press and
HOLD the [Call] button for approximately 10 seconds.
Continue here from "Easy Pairing"
5. Set your mobile phone to search for Bluetooth devices.
Bluetooth: Enabled
Paired Devices:
*Empty *
Searching for devices
1 found
Stop
6. When the phone nds the headset, con rm by selecting
EM529 from the list.
Bluetooth: Enabled
Paired Devices:
EM529
Select Device:
EM529
Cancel
7. Enter the passcode "0000" when prompted by the phone.
Bluetooth: Enabled
Paired Devices:
EM529
Enter numeric passkey
for EM529:
0000
OK
OR depending on which model mobile phone you are trying
to connect the headset to, it may not be necessary to enter a
passcode and the following message (or similar) may appear on
your phone's display.
Bluetooth: Enabled
Paired Devices:
EM529
"EM529" would like to pair
with your phone. Would you
like to allow it to pair?
Cancel Pair
Select "Pair" to complete the pairing process.
8. Your mobile phone will con rm that the pairing process was
completed and prompt you to accept the connection.
Please select "YES" to connect the headset to your mobile
phone. If the pairing was successful, the headset's blue
indicator light turns to standby mode and ashes once
every three seconds.
Bluetooth: Enabled
Paired Devices:
EM529
Confirm connection to
EM529?
/
YES NO
9. When attempting to reconnect the headset to your mobile
phone, you may see the message below and your mobile
phone will prompt you to accept the connection request to
the EM529 headset, and an option not to ask this again.
Please accept the connection, and if you select "Don't ask this
again", your phone will automatically accept future connection
requests from the headset.
Bluetooth: Enabled
Paired Devices:
EM529
Accept connection request
from EM529?
/
YES NO
Don't ask this again
NOTE: The screenshots above are typical of many Bluetooth
enabled phones in the market today, and are used to
assist in the explanation of the pairing process. Your
mobile phone's or Bluetooth enabled device's interface
and interaction with the headset may be slightly
di erent from the illustrations shown.