Emptying The Water Container - Hotpoint Ultima Condenser Tumble Dryer User Handbook Manual

Emptying the Water Container

Water
Container
Plinth
Moulding
(not fitted to
all models)
To Empty Water
Container
Empty the water container after EVERY programme.
Failure to do this will result in the water container
becoming full and the load will not dry.
Remove plinth (where fitted) by slightly lifting and sliding to the left.
Pull the container out of the dryer and empty it into a sink (or other
suitable drain).
If your dryer is stacked on top of a Washing Machine, the Tumble
Dryer can be plumbed into the drain by attaching a suitable tube to the
stub at the rear of the dryer, after removing the blanking cap. When
plumbed into a drain the water container does not need to be emptied.
Water
Container
Sink
15