Important Note - Hitachi L26HP03U Instructions For Use Manual

start A.P.S. (Auto Programming System)
1
When the TV is turned on for the first time, the menu for the language selection
appears on the screen. The messag e "Welc ome please sel ect your
language! ! " is written in all language options sequentially in the menu on the
screen. By pressing
press OK K . After then, First time Installation Menu u will appear on screen. By
pressing or buttons, select country item you want to set and press OK K button.
2
After the First Time Installation is set, the following message appears on the
screen. Do you want to start an automatic channel scan?
To start automatic search, select "Yes s ", to cancel select "No o ". This process will
take about five minutes. To cancel searching, you can press "MENU U " button at any
time during the process.
3
After Automatic Search h process is completed, a message asking for
analogue channel search appears on the screen. To continue Auto Program,
first set the language, country and teletext language by using
then press the RED or OK K button
4
After APS is finalized, the programme table will appear on the screen. In the
programme list you will see the programme numbers and names assigned to
the programmes.
5
For details, please refer to the Install Menu u section of the instruction book.

important note.

Once the TV has found all your local stations, they are then automatically
assigned a programme numberand name, if available from the broadcast.
or buttons highlight the language you want to set and
or button and