Reset; Store; Sound Menu; Volume - Hitachi 42LDF30UA Instructions For Use Manual

Use " " or " " buttons, to change picture zoom
to Auto, 16:9, 4:3, Panoramic, 14:9, Cinema ,
Subtitle or Zoom .

Reset

Press " " or " " button to select Reset. Press
" " or " " or OK button to reset the picture
modes to factory default settings.

Store

Press " " or " " button to select Store. Press "
" or OK button to store the settings. " Stored... "
will be displayed on the screen.

Sound Menu

Volume

Press " " or " " button to select Volume .
Press " " or " " button to change the level of
the Volume.

Equalizer

Press " " or " " button to select Equalizer .
Press " " button to view equalizer menu.
Press " " or " " button to change the preset.
In equalizer menu, the preset can be changed
to Music, Movie, Speech, Flat, Classic and
User .
Select the desired frequency by pressing "
" or " " button and increase or decrease the
frequency gain by pressing " " or " " button.
Press the " M" button to return to the previous
menu.
Note: Equalizer menu settings can be changed only
when the Equalizer Mode is in User .

Balance

This setting is used for emphasizing left or right
speaker balance.
Press " " or " " button to select Balance.
Press " " or " " button to change the level of
the balance. Balance level can be adjusted
between -32 and + 32.

Headphone

Press " " or " " button to select Headphone .
Press " " button to view the headphone
menu.
Headphone sub-menu options are described
below:
Volume
Press " " or " " button to select Volume. Press
" " button to increase headphone volume
level. Press " " button to decrease headphone
volume level. Headphone volume level can be
adjusted between 0 and 63 .
Store
Press " " or " " button to select Store. Press "
" or OK button to store the settings. " Stored... "
will be displayed on the screen.

Sound Mode

Press " " or " " button to select Sound Mode .
Using " " or " " button, you can select Mono,
Stereo, Dual I or Dual II mode, only if the
selected channel supports that mode.

AVL

Automatic Volume Limiting (AVL) function
adjusts the sound to obtain fi xed output level
between programmes (For instance, volume
level of advertisements tend to be louder than
programmes).
Press " " or " " button to select AVL. Press " "
or " " button to set the AVL as On or Off .
English - 31 -