Connect - Linksys WUSB300N User Manual

Chapter 3
MAC Address This is the MAC address of the wireless
network's access point or wireless router.
Signal Strength
The Signal Strength bar indicates the
signal strength.
Link Quality The Link Quality bar indicates the quality of
the wireless network connection.
Click Statistics to go to the Wireless Network Statistics
screen. Click Back to return to the initial Link Information
screen. Click Save to Profile to save the currently active
connection settings to a profile.
Wireless Network Statistics
The Wireless Network Statistics screen provides statistics
on your current network settings.
Wireless Network Statistics
Transmit Rate
This is the data transfer rate of the current
connection. (In Auto mode, the Adapter dynamically shifts
to the fastest data transfer rate at any given time.)
Receive Rate This is the rate that the Adapter receives
data.
Packets Received
This shows the packets that the
Adapter receives, in real time, after connecting to the
wireless network or after clicking Refresh.
Packets Transmitted
This shows the packets that the
Adapter transmits, in real time, after connecting to the
wireless network or after clicking Refresh.
Bytes Received This shows the bytes that the Adapter
receives, in real time, after connecting to the wireless
network or after clicking Refresh.
Bytes Transmitted
This shows the bytes that the Adapter
transmits, in real time, after connecting to the wireless
network or after clicking Refresh.
Driver Version
This shows the Adapter's driver version.
Signal Strength
This is the intensity of the wireless signal
that the Adapter receives.
Wireless-N USB Network Adapter
Transmit Power This is the power output at which the
Adapter transmits.
Up Time
This indicates the length of the most recent
connection to a wireless network.
Total Up Time This indicates the cumulative total of the
Adapter's connection time.
Signal Strength
The Signal Strength bar indicates the
signal strength.
Link Quality
The Link Quality bar indicates the quality of
the wireless network connection.
Click Back to return to the initial Link Information
screen. Click Status to go to the Wireless Network Status
screen. Click Save to Profile to save the currently active
connection settings to a profile. Click Refresh to reset the
statistics.

Connect

The Connect screen displays a list of available networks
in the table on the left. The table shows each network's
wireless network name, channel, and the quality of
the wireless signal the Adapter receives. You may click
Wireless Network Name, CH (Channel), or Signal, to sort
by that field.
Connect
Wireless Network Name The SSID or unique name of
the wireless network is displayed here.
CH
This is the channel that the network uses.
Signal
This is the percentage of signal strength, from 0
to 100%.
Site Information
For each network selected, the following settings are
listed:
Wireless Mode This is the SSID or unique name of the
Wireless Network.
Configuration
7