Lightolier SL111B2 Specification

Page 1 of 5
Dimensions
Lampholder Housing
Ordering guide
(complete luminaire consist of unit & power feed)
Unit/Louver Cat. No. Shielding Lamp (linear)
SL111B228PIU
SL111B228PIH
SL111B254PIU
SPR
SL111B254PIH
ORB
SL111B254MZ1
SL111B254MZ2
SL111B254PCU
Features
Ballast Channel: 0.05" (1.3rnm) min. thick, 1-1/2" x 1-1/2" (38mm x 38mm) brushed
and anodized extruded aluminum ballast channel. Provided with knock-outs and
threaded holes to accept all mounting accessories.
Channel Cover: 0.04" (1mm) thick brushed and anodized aluminum ballast cover.
Press-fit installation. No visible hardware.
Multi-Function Block (2): Solid brushed and anodized aluminum finish. Retains
lampholder housing to the ballast channel. Also functions as a wireway for
continuous rows and patterns.
Spiral Louver: 0.022" (56mm) to 0.089" (2.3mm) thick painted aluminum. Slide over
the lamp and attach as a ground to the luminaire to operate the lamp properly.
Orbit Louver: 0.015" (0.38mm) thick painted aluminum semi-diffused. Slide over the
lamp and attach as a ground to the luminaire to operate the lamp properly.
Wand: 0.125" (3.2mm) thick brushed and anodized aluminum tubing.
Plug Insert (2): 0.56" (14min) dia. 0.31" (8mm) min, deep. Solid brushed and
anodized aluminum finish. Hide the holes at each end of ballast channel when
luminaire is not row mounted.
Lampholder Housing (2): 0.08" (2mrn) min. thick, 1" (25mm) square brushed and
anodized aluminum with turret style locking socket.
Lightolier
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2008 Philips Group • SL111B2.pdf
Lightolier is a Philips group brand
46-3/16"
(1173mm)
Channel Cover
44-1/2"
(1130mm)
43-1/2"
(1105mm)
Volts
120/277V
2-28W T5
347V
120/277V
347V
2-54W T5 HO 120V
277V
120/277V
www.lightolier.com
Ballast
Multi-Function Block
Wand
2"
(51mm)
3-1/2"
(89mm)
1-3/8"
(35mm)
Ballast Type
Programmed Rapid Start
Units: Brushed and Anodized Aluminum
Spiral Louver: Textured Light Grey (paint)
Orbit Louver: Semi-diffused
Dimming Mark 10
Dimming PowerSpec HDF
Job Information
Job Name:
Cat. No.:
Lamp(s):
Notes:
Canlyte
3015 Louis-Amos, Lachine, Québec H8T 1C4 • (514) 636-0670 • (514) 636-0460
SL111B2
KUBIK 1.5
Louver Stand-Off Unit
1"
(25mm)
1-1/2"
(38mm)
6-1/4"
(158mm)
SPR: Add to unit. The Spiral
louver produces refined, effective
lengthwise shielding to minimize add
to direct view of the light source.
ORB: Add to unit. The Orbit louver
displays perfect balance as it
rotates into any number of positions
from uplight to downlight to wall
washing. (Position shown below).
Finish
Anodized Aluminum
Type:
www.canlyte.com
Plug Insert