Advertisement
NSTRUCTION SHE~ NO.
1S:7920
INSTALLATION OF THE SLOPED CEILING ADAPTER (Continued)
W384
Page
2
of
2
b.
Attach DUO-CAST TRIM FRAME to SLOPED
CEILING ADAPTER with flange
down, by tightening
(4) PHILLIPS HEAD POINTED SHEET METAL
SCREWS. See Fig. 6 and instruction
3.
B. For Modular Frame-In Calculates:
a. Secure
MODULAR DIE-CAST RING to SLOPED
CEILING ADAPTER by tightening
(4) PHILLIPS HEAD
POINTED SHEET METAL SCREWS. See Fig. 7 and
instruction
3.
C. For Recessed H.I.D. Downlights
without
Duo-Cast Trim:
a.
Detach Lightshield
(cone, Multi-Groove
or reflector)
from fixture. See instruction
sheet packed with
fixture.
b. Secure SLOPED CEILING ADAPTER to the HOUSING
SUPPORT by tightening,
from inside of fixture, the
(4) PHILLIPS HEAD POINTED SHEET METAL
SCREWS as shown in Fig. 8.
NOTE
For EL8 fixture series bend(4) TABS 90°
outward from NOTCHES to center HOUSING
SUPPORT in SLOPED CEILING ADAPTER. Then
secure with (4) WASHERS though NOTCHES
shown in Fig. 9.
D. For Calculite and Recessed H.I.D. Downlights
with
flangless Sheet Metal Trim Ring:
a. Detach SHEET METAL TRIM RING from fixture (see
instruction
sheet packed with fixture).
b. Attach SHEET METAL TRIM RING to SLOPED
CEILING ADAPTER by tightening
(4) PHILLIPS HEAD
POINTED SHEET METAL SCREWS. See Fig. 10 and
instruction
3,
;. AfLer complete installation,
replace white molded ring (if
any) and Lightshield
(cone, Multi-Groove
or reflector). See
instruction
sheet packed with fixture.
PHILLIPS HEAD POINTED
'"
SHEET METAL SCREWS (4)
k
r--
SLOPEO CEILING AOAPTER
FIG.
6
!!
TlltE
Ii'
PHILLIPS HEAO POINTEO
_
SHEET METAL SCREWS (4)
/
A
~
ouo-cAsTTR\M
FRAME
(FLANGE OOWN)
/
--
SLIJPE'O CEILING ADAPTER
FIG.
7
PHILLIPS HEAO
MOOULAR OIE-CAST RING
POINTED SHEET
METAL SCREWS (4)
WASHER
\
SLOPEO CEILING
ADAPTER
WHITE MOLDEO RING
FIG.
8
H.I.O. HOUSING SUPPORT
\
\
,,
II
BRACKET (4) RIVETED
TO SLOPED CEILING
AOAPTER
MULTI-GROOVE
OR REFLECTOR
PHILLIPS HEAD POINTEO
SHEET METAL SCREWS (4)
SLOPEO CEILING
AOAPTER
FIG.
9
H.I.O. HOUSING
Advertisement
