Advertisement
Quick Links
Page 1 of 1
12 5/8"
(321mm)
14 3/8"
(365mm)
Ceiling Cutout: 5 1/16" (129 mm) Dia.
Frame-In Kit
C4LVMU
Magnetic 120V/277V
C4LVE1
Electronic 120V
C4LVE2
Electronic 277V
Note: Magnetic transformers may produce audible sound when used with dimmers, which may be objectionable in acoustically critical areas.
Features
1. Housing: Drawn, 0.036" (20 Gauge) steel. Matte black finish.
2. Mounting Frame: Die-formed, 0.036" (20 Gauge) steel, matte black finish.
Four slots are positioned 90° apart to simplify alignment.
3. Retaining Springs: Steel springs secure reflector trim to mounting frame
for tool-less installation.
4. Mounting Bars: Galvanized steel, 0.048"; pre-installed telescoping bars
extend from 20" to 30" long and lock securely into position. Built-in locking
tabs provide attachment to common T-bar systems. Self-centering feature
simplified installation in 24" on center grid systems. Attaches to steel or
wood joists without accessories. Frame vertical adjustment mechanism
accommodates mounting to virtually any ceiling system using pre-installed
mounting bars, or 1/2" EMT tubing (by others). Single locking features secures
all adjustments. Alignment holes and markings allow fixture to be pre-set
prior to installation. Final adjustment can be made from below, inside fixture.
5. Lampholder: Porcelain bi-pin socket. Pre-wired with Teflon leads.
6. Junction Box: 3-1/2" X 4-3/4" X 2-3/8" deep; 0.063 (14 gauge) galvanized
steel. UL listed for maximum of (4) No. 12 AWG (American Wire Gauge) 90°
C through branch circuit conductors. Accessible from inside and outside
luminaire. Outside J-Box door is hinged for maximum access.
7. Thermal Protector: Meets NEC and UL requirements. Insulation must be
kept 3" away from any parts of the luminaire and must not be placed above
luminaire in a manner which will entrap heat.
Electrical
Transformer: Replaceable from below; transformer door rotates into fixture,
positioning transformer directly over the aperture. Magnetic: 120V or 277V
60Hz. Dual-voltage, core & coil. Electronic: 120V or 277V 50/60 Hz., regulated
lamp voltage, HPF (High Power Factor), EMI (Electro Magnetic Interference) and
short circuit protections, thermal auto-reset, quiet operation.
Lightolier is a Philips group brand
5" (127mm)
5 1/2"
5" (127mm)
(140mm)
Plus Ceiling Thk.
Reflector Trim
Open
Adjustable
Adjustable
Downlight
Accent
2" Aperture
C4MRD
C4MRA
C4MR2
42W-75W
42W-75W
42W-75W
MR16 (12V)
MR16 (12V)
MR16 (12V)
Calculite
Evolution Non-IC Frame-In Kit
®
7
6
3
2
1
5
1/2" (13mm) Lip
Adjustable
Lensed
1 1/4" Pinhole
Wall Washer
C4MRP
C4MRL
42W-75W
42W-75W
MR16 (12V)
MR16 (12V)
Electrical (cont.)
Dimming Controls: Use only dimmers specifically designed for use with
magnetic or electronic transformers. Consult Lightolier Controls division for
information. Low voltage luminaries may produce audible sound when used
with dimmers.
Accessories
Thick Ceiling Adapter: for .875" - 1.75" thick ceiling capability, utilize C4TCA2
Labels
CULUS (Suitable For Damp Locations)
Options and Accessories
Chicago Plenum: C4LVLCMU, E1, E2, Requires above-ceiling access.
Job Information
Job Name:
Cat. No.:
Lamp(s):
Notes:
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2011 Philips Group • G0711
4" Aperture, MR16 (12V)
4
Vertical Adjustment
1" (25mm)
to 2 3/4" (70mm)
.875" Max (28mm)
Ceiling Thickness
Glasslyte
Glasslyte
Lensed
Downlight
Adjustable
Adjustable
C4MRGD
C4MRGA
C4MRW
42W-75W
42W-75W
42W-75W
MR16 (12V)
MR16 (12V)
MR16 (12V)
Type:
C4LV
Advertisement
