Maxtor Quickview 40 Product Manual page 15

General Description
Performance
• 10.0 ms seek time (Increased in Quiet Mode)
• Average rotational latency of 4.17ms
• New Ultra ATA interface with Maxtor-patented Ultra ATA/133 protocol
supporting burst data transfer rates of 133MB/s.
• 2 MB buffer with 1.9MB (approximate) Advance Cache Management (ACM).
• Advanced Multi-burst ECC on-the-fly
• Support of all standard ATA data transfer modes with PIO mode 4 and
multiword DMA mode 2, and Ultra DMA modes 0, 1, 2, 3, 4, 5 and 6
Reliability
• 57 Byte Reed-Soloman ECC with up to 54 Byte correction capability.
• S.M.A.R.T. 4 (Self-Monitoring, Analysis and Reporting Technology)
• Auto Park and Lock actuator mechanism
• Transparent media defect mapping
• High durability with 100,000 cycles for reliable load/unload function
• High performance, in-line defective sector skipping
• Reassignment of defective sectors discovered in the field, without reformatting
• Shock Protection System to reduce handling induced failures
• Data Protection System to verify drive integrity
• Quiet Drive Technology (QDT)
Versatility
• Power saving modes
• Downloadable firmware
• Cable select feature
• Ability to daisy-chain two drives on the interface
2-2
Quickview 40 20/30/40GB AT