Panasonic TOUGHBOOK CF-52AJYZDZM Service Manual page 52

9.2.18. Setting the Speakers
1. Place the Speakers on the computer.
2. Connect the Cables to the Connector(CN4202 and CN4203).
3. Paste the Tape on the Cable.
4. Attach the Speaker Holder R to the computer.
Note:
Do not attach the Speaker Holder L to the computer yet.
9.2.19. Setting the Modem
1. Connect the Cable to the Connector.
2. Paste the Tape2, Conductive Tape-Modem and Tape1.
3. Fix the Modem to the SW LED MDC PCB using the two Screws <N2>.
Screws <N2> : DFHE5122YA
Speaker
L
Tape
Cable
CN4202
CN4203
<N2>
Cable
SW LED MDC PCB
9-29
Speaker holder R
Speaker
R
Cable
Modem
CN4200