Panasonic TOUGHBOOK CF-30CTQAZBM Service Manual page 53

Preparation oh HDD ASSY
Fit to the corner.
Safety Working
Check the part number.
Important Parts
for Safety
Heater is set
Do not fold because the thermal
fuse exists in this part.
HDD FPC Ass'y
Valley Fold
* Notes:
1. Apply the load when attaching the parts. 20N to 30N (2 to 3Kgf)/cm2
Turn it to the board side (back side).
1. Do not gouge when inserting and removing the socket.
2. Do not drop HDD or add any impacts on it.
3. Insert CN into the end firmly.
4. Apply the load when attaching the parts. 20N to 30N (2 to 3Kgf)/cm2
Attach the Fuse Sheet
Heater
0 2
1 1
Mountain Fold
20 1
HDD is set
Attach the HDD Tape S
Attach the Heater Fixed Tape
Attach it pushing the shaded
part not to push the fuse.
Back Side
Fuse
Lead Wire
HDD
9-31
10 1
7 1
Attach the HDD Tape L
Turn the surplus into the back.
16 2
Do not bend the bending
part of Heater
Connect the Connector
Insert the HDD FPC Ass'y