Advertisement
MODULE SPECIFICATIONS
TTL/ADJUSTABLE CHANNEL OUTPUTS
oputput impedance
TTL/CMOS MODES
output level
rise time
slew rate
jitter
ADJUSTABLE MODE
output level
output resolution
current
slew rate
overshoot
rise time
TRIGGER/GATE DUAL INPUT (STANDARD)
Standard dual channel input, providing one trigger input and one
gate input. May be used with the dual trigger rmware option to
provide two independent trigger sources.
threshold
maximum input voltage
resolution
input impedance
insertion delay
pulse inhibit delay
output inhibit delay
jitter
*Other custom modules available. Call with your request.
50 ohm
4.0 V typ into 1 kohm
3 ns typ
0.5 V/ns
50 ps RMS
2.0 to 20 VDC into 1 kohm
1.0 to 10 VDC into 50 ohm
10 mV
200 mA typical, 400 mA max
(short pulses)
> 0.1 V/ns
< 100 mV + 10 % of pulse
amplitude
15 ns typ @ 20 V (high imp)
25 ns typ @ 10 V (50 ohm)
(10 % - 90 %)
0.2 to 15 VDC
60 V peak
10 mV
1 Mohm + 40 pF or 50 ohm
< 160 ns
< 120 ns
< 50 ns
< 800 ps RMS
Toll Free Phone
(800) 510-6530
Fax Phone Line
(406) 582-0237
SYSTEM EXTERNAL TRIGGER/GATE INPUT(S)
TRIGGER INPUT
function
rate
slope
behavior
GATE INPUT
function
pulse inhibit or output inhibit
polarity
active high / active low
behavior
used to control the internal rate generator
STANDARD FEATURES & FUNCTIONS
communications
external clock in
external clock out
con guration storage
STANDARD OUTPUT MODULES
AT20
OPTIONAL MODULE
TZ50
SYSTEM OPTIONS
I
DT15
Email
Sales@QuantumComposers.com
Web
www.QuantumComposers.com
generate individual pulses, start a burst
or continuous stream
DC to 1/(200 ns + longest active
pulse)
rising or falling (maximum of 5 MHz)
used to control the internal rate
USB/RS232/Ethernet
10 MHz - 100 MHz in 1 MHz increments
5 MHz - 40 MHz
T0, Rate, Chan, 2x ExtPLL, 1 ExtPLL, ½
ExtPLL, ½ Ext, 40MHz, 20MHz, 10MHz,
5MHz, and Disabled
quad channel, TTL/CMOS &
adjustable output module
quad channel, high current
TTL/CMOS (for driving 50 ohm loads)
& adjustable output module
incrementing (provides automatic
high speed incrementing/decrementing
of delay and/or pulsewidth for each
channel)
dual trigger logic – provides
additional trigger via gate input
V1.2 3/1/12
Advertisement
