The Controls - Hotpoint Ultima Tumble Dryer User Handbook Manual

The Controls

Setting the
Programme
Programme
Options
Starting the Dryer
Alarm Switch
Alarm Switch
To set the required programme, all you have to do is turn the
Programme Control knob until the required selection appears in line
with the indicator.
Automatic programmes (for load sizes more than 1kg)
1. Dry Cottons (HIGH heat)
This gives driest results.
Some bulky items or large load of towels may appear slightly
damp after this programme and require a short period of
timed drying.
2. Damp Cottons (HIGH heat)
3. Iron Dry Cottons (HIGH heat)
This gives the wettest results.
4. Dry Synthetics (LOW heat)
5. Damp Synthetics (LOW heat)
6. Iron Dry Synthetics (LOW heat)
Timed programmes (for load sizes less than 1kg)
7. 40 minutes (LOW heat) include cool tumble followed by the
Crease Care phase.
8. 30 minutes (LOW heat) include cool tumble followed by the
Crease Care phase.
9. 20 minutes (LOW heat) include cool tumble followed by the
Crease Care phase.
10. Airing, 20 minutes of cool tumble.
11. Easy Iron Programme, see section"Easy Iron Programme".
For description of other programmes see next page.
Press and release the START button to commence a drying
programme (The drying programme must have been selected first).
The Active Light will then glow.
NOTE: If the door is opened during a programme, the Dryer will
automatically stop. To continue the programme, after closing the
door, the START button must be pressed.
The alarm option is selected with the switch in the OUT position, if
you do not need this option press the switch (to the IN position).
The alarm (when selected) will sound at the end of the programme or
intermittently during the Crease Care phase.
Active Light Drying Light Low Heat Light
Start Switch Programme Control
11