EPG Timer
You can choose whether or not the screen
switches on when the timer event begins
- please see page 17 (Rec screen status (LCD
Power on/off)). This is so that if you are using
the timer to make a recording to your VCR or
other device, the TV screen will not switch on
unless you want it to.
If you try to switch to another channel while
a timer event is in progress, the following
message will appear: 'WARNING: CHANGING
THE CHANNEL WILL INTERRUPT YOUR
EVENT TIMER. ARE YOU SURE YOU WANT
TO PROCEED? YES/NO'. Select Yes or No
according to your wishes.
1
Press GUIDE to display the Guide menu.
Then press / / / to highlight the
programme you want to set as a timer event,
then press ENTER.
671 MNO
671_MNO_10Step_0820_0100_0120_Audio2_0100_0120...
Channels
MNO
PQS
STU
TCM
VWXYZ
SAT.1
ARTE
DEF
Note:
•
If you select an event which has already started, the
selected program will be displayed on the screen, as
you cannot set the timer for a programme which has
already started.
•
To display the stored timer events, press GUIDE
twice. The EPG Timer menu (see step 3 below)
will appear. You can also delete or change the
frequency (Once / Daily / Weekly) of the stored
timer events (but please note that you cannot edit
the time details that have been set from the EPG).
2
The confi rmation banner will be displayed.
Press
or
ENTER (the selected option is shown in blue).
3
The EPG Timer menu will appear.
Press the Red key to set the Timer mode for a
selected event.
24
Guide
16:50 Sun 20/08/2009
01:00
01:30
671_M...
671_M...
672_PQR_SMPTE_col...
672_PQR_SMPTE_col...
673_STU_SDTV... 673_STU_SDTV Moving...
No Event Name
679_VWXYZ_Monosoo_0100_0300...
No Event Name
No Event Name
No Event Name
Page -
Page +
Prev.Day
Navigate
View
Info
Enter
to select 'Yes' or 'No', then press
Event Timer
Service Name Mode
Date
Time
BBC ONE
Once
26/02/09
08:10
Timer mode
Delete Timer
Edit Timer
Edit Duration
Navigate
Enter
4
The Timer mode specifi es the frequency of
Timer wake-up which can be set as Once,
Daily or Weekly.
Press ENTER to save the selected Timer
mode.
Note:
To delete a timer event, select the specifi ed event,
then press the Green key.
5
To return to the Guide menu, press DIGITAL
TV
MENU.
S
u
n
2
0
0 /
8
2 /
0
0
9
To clear the menu screen, press EXIT.
02:00
671_MNO_10step
Note:
•
When the EPG Timer starts, the message "Event Timer
Started" will appear.
•
A maximum of eight Timers can be programmed.
•
If the EPG Timer starts when it is already switched on, it
Next Day
will start at the exact time that is set. If it starts from the
Exit
Guide
TV/Radio
standby mode, it will begin 20 seconds in advance of
the stated time.
•
You cannot hasten the start time from the original start
time of the Event.
•
You cannot set with the same date and time of another
Event.
•
Press the Yellow key to change the start time of the
event.
•
Press the Blue key to change the time duration of the
event.
•
If the EPG Timer begins during standby mode, the
(On/timer/Standby) indicator on the unit will be lit in
orange. This is to indicate that an EPG Timer event
has begun in standby mode.
•
When in power-off-condition, EPG Timer cannot be
activated.
Duration
00:23
Exit
Event Timer
Service Name Mode
BBC ONE
Once
Once
Daily
Weekly
Date
26/02