MSI MS-7304 Manual page 49

Cool'n'Quiet
The Cool'n' Quiet technology can effectively and dynamically lower CPU speed and
power consumption.
Important
To ensure that Cool'n'Quiet function is
activated and will be working properly, it
is required to double confirm that:
1. Run BIO S Setup and s elect Fre-
quen cy/Volta ge Cont rol. Un der
Frequency/Voltage Control, s et
Cool'n'Quiet to [Enabled].
2. Enter Windows, and select [Start]->
[Settings]->[Control Panel]->[Power
O p tion s ]. E nt er Po w e r O p ti on s
Properties tag, and select M inimal
Power M anagement under Power
schemes.
Advance DRAM Configuration
DDR Memory Timing by SPD
Setting to [Enabled] enables DRAM automatically to be determined by BIOS based
on the configurations on the SPD (Serial Presence Detect) EEPROM on the DRAM
module.
Bank Interleaving
Interleaved memory is system memory divided into two or more sections. Setting
to [Enabled] allows memory to be accessed faster since each section of memory
is capable of being utilized at once.
1T/2T M emory Timing
This setting controls the SDRAM command rate. [1T] is faster than [2T].
BIOS Setup
3-19