Hitachi P42H01U User Manual page 19

CONNECTION (continued)
Connecting Procedure (continued)
DVB Common Interface:
The Common Interface allows you to insert CAM (Conditional Access Module) and a suitable Smart Card to give
you access to additional Pay-TV services.
Before inserting the module, make sure to turn off the main power and then insert the module all the way into the
slot.
Headphone
Plug headphones with a mini plug (3.5mm) into this socket, located at side of plasma.
TV (Left view)
4. Connecting the plug into the wall socket
Connect the Power Cord after completing all other connections.
(The type of plug is different from this drawing for some countries.)
UK only
Except UK
CAUTION
• Use only the Power Cord provided.
• Do not use a power supply voltage other than that indicated(AC220-240V, 50/60Hz). It may cause fire or electric shock.
• For the plasma television, a three-core power cord with a ground terminal is used for efficiency protection. Always be
sure to connect the Power Cord to a grounded outlet and make sure that the cord is properly grounded. If you use a
power source converter plug, use an outlet with a ground terminal and screw down the ground line.
• Ensure that both ends of power cord are easily accessible.
• If you have to change the power cord, please use the certified power cord that meets your region's safety standard.
18
TV (Rear bottom view)
CAM Common Interface Module
TV (Rear bottom view)