Table of Contents
Advertisement
RECORDING FROM IDTV
Connect your VCR to AV2 via a scart lead.
Set the AV2-OUT in the feature menu to DDT,
as illustrated on page 21 and described on
page 22.
Set the time as described above.
Set your TV to standby using the remote
control.
Set your VCR to correspond with the time set
on your TV and select external input (refer to
your VCR instruction book).
NB. If you switch on your TV whilst the timer
recording is active and then switch back to
standby, the timer recording will be cancelled;
the timer setting will be deleted and the desi-
red programme will not be recorded.
Advertisement
Table of Contents
