Maxtor D540X-4K Product Manual page 17

• High performance, in-line defective sector skipping
• Reassignment of defective sectors discovered in the field, without
reformatting
• Shock Protection System II to enhance protection against both operating
and non-operating shock
• Data Protection System to verify drive integrity
Versatility
• Power saving modes
• Downloadable firmware
• Cable select feature
• Ability to daisy-chain two drives on the interface
Windows MS Logo Certification
• Passed Windows Me, Windows 98, Windows 2000, and Windows NT
Workstation 4.0 Logo testing by Microsoft Windows Hardware Quality
Labs (WHQL)
• Master ID# 43395
 
Maxtor Corporation's disk drive products meet all domestic and international
product safety regulatory compliance requirements. Maxtor's disk drive products
conform to the following specifically marked Product Safety Standards:
• Underwriters Laboratories (UL) Standard 1950. This certificate is a
category certification pertaining to all 3.5-inch drive models in the
U.S.A. and Canada.
• TUV Rheinland Standard EN60 950. This certificate is a category
certification pertaining to all 3.5-inch drive models.
2 T Q F W E V ' / +  ' / 5 3 W C N K H K E C V K Q P U
• CE Mark authorization is granted by TUV Rheinland in compliance
with our qualifying under EN 55022:1994 and EN 50082-1:1997.
• C-Tick Mark is an Australian authorization marked noted on Maxtor's
disk drive products. The mark proves conformity to the regulatory
compliance document AS/NZS 3548: 1995 and BS EN 55022: 1995.
• Approval from Taiwan BSMI. Number: 3892A638
• Korea EMI certification approved. MIC number: EH011-01-1977
Maxtor D540X-4K 20.4/40.0/60.0/80.0 GB AT
General Description
2-3