Installation Requirements; Tools And Parts - Estate ETW4100SQ Installation Instructions Manual

Gather the required tools and parts before starting installation.
The parts supplied are in the washer basket.
Parts needed (not provided with washer):
Inlet hoses
To order:
Call the dealer from whom you purchased your washer.
Reference the toll-free number on the front page of the
Washer User Instructions.
Visit the website on the front page of the Washer User
Instructions.
NOTE: Replace inlet hoses after 5 years of use to reduce the risk
of hose failure. Record hose installation or replacement dates for
future reference.
Parts supplied:
A
A. Beaded tie strap
B. Front leveling feet with nuts (2)
C. Drain hose form
Tools needed for installation:
Adjustable or open end
wrench " (14 mm)
Level
Wood block
2

INSTALLATION REQUIREMENTS

Tools and Parts

Flat washers
B C
Ruler or measuring tape
Pliers that open to 1 "
(3.95 cm)
Flashlight (optional)
Alternate Parts
Your installation may require additional parts. For information on
ordering, please refer to the toll-free phone numbers on the front
page of the Washer User Instructions.
If You Have: You Will Need to Buy:
Laundry tub or Sump pump system (if not already
standpipe taller available)
than 96" (2.4 m)
1" (2.5 cm) 1 " (3.2 cm) diameter to 1" (2.5 cm)
diameter diameter standpipe adapter,
standpipe Part Number 280130
Overhead sewer Standard 20 gal. (76 L) 39" (99 cm) tall
drain tub or utility sink, sump pump and
connectors (available from local
plumbing suppliers)
Floor drain Siphon break kit, Part Number 280129;
additional drain hose,
Part Number 3357090
Water faucets 2 longer water fill hoses:
beyond reach of fill 6 ft (1.8 m) Part Number 76314,
hoses 10 ft (3.0 m) Part Number 350008
Drain hose too Kit Part Number 280131
short
Lint clogged drain Drain protector, Part Number 367031