Procedure Before Using The Multi-Screen Display Function; Setting The Virtual Display; Enable The Virtual Display Driver (Windows Only) - Epson PowerLite 1835 Operation Manual

Using Multi-Screen Display
Arrangement example 2
A Actual monitor image
B Image of virtual display
PowerPoint file presenter tools
Slide Show using a PowerPoint file
Procedure Before Using the Multi-screen Display
Function
A
Set the virtual display.
s "Setting the Virtual Display"
In a Windows environment, enable the virtual display
necessary. Also, for both Windows and Mac OS, set up the virtual
display arrangement.
B
Allocate the image to be projected.
s "Allocating the Image to be Projected"
Open the file to be projected, and then move the screen to the vir-
tual display according to the actual projection arrangement.
C
Project the allocated images.
s "Projecting the Allocated Images"
Allocate a virtual display number to a projector, and then start pro-
jection.

Setting the Virtual Display

This section explains the virtual display for arrangement example 1.
s "Example of Adjusting the Virtual Display"

Enable the virtual display driver (Windows only)

Enable the virtual display g driver. If you have already enabled the virtual
display while installing EasyMP Network Projection, this operation is not
necessary. Go to the following section.
25
p.25
g driver as
p.30
p.31
p.24